DataSnap SDI-12 data logger

Portable SDI-12 mini data recorder. Takes over 53,000 5-datapoint scans before it overwrites the oldest data. A/B USB cable included. Battery pack requires 8 AA batteries. AC/DC universal adapter is also included.

Fully compatible with Acclima TDR and TDT Sensors.

Researchers Love Acclima Technology!

Find out why by reading what the research says.

features

  • Accommodates up to 10 SDI-12 sensors

  • Connect sensor & click button

  • No SDI-12 programming knowledge required

  • Adding Acclima sensors is even easier - DataSnap will find all attached Acclima sensors with the click of your Laptop button.

  • Take manual readings any time when connected to Laptop

When used in conjunction with Acclima's Patented Soil Moisture Sensors, the most accurate and stable sensors in the industry, you are able to capture the following data:

  1. Soil Moisture

  2. Soil Temperature

  3. Soil Conductivity

  4. Soil Permittivity


What’s Included

  • Portable DataSnap data logger

  • Acclima SnapView software

  • 1m USB A/B cable

 

Data Storage Space:

A DataSnap with 10 configured Acclima moisture sensors, reading sensors every 30 minutes can store up to 4 months worth of data. To increase the time span of the logged data, reduce the number of sensors or take readings less often.

5 sensors = 8 months storage.

When the DataSnap’s memory is full it will erase a few of the oldest readings and write the new readings. This means the SolarSnap will not stop logging when its memory is full. But data that was replaced is permanently lost.

 

Connectivity:

DataSnap connects to your PC and our powerful SnapView software via USB.

  

Bundled SnapView Software

Configures Captures and Analyses all your DataSnap data.

Acclima SnapView software simplifies DataSnap configuration and synchronisation via USB. It can manage multiple DataSnap connections and retrieve real-time sensor data from each. SnapView provides options for viewing data in table or graph formats. Data is easily exported for use in other analytical applications. SnapView is compatible with any Windows™ based PC (XP or newer).

Screenshots:

 

Hardware Features:
Data logging of the first 5 datapoints of the SDI-12 M! command.
USB to SDI-12 Bridge
Supports powering sensors from the USB bus (5V only)
Supports an optional 12V power adapter
Short circuit protection
Acclima SnapView software provided
Compatible with terminal software applications like HyperTerminal or PuTTy
Supports 3rd party software development 

Data Storage Space:
Total Memory Capacity = 59392 Sensor Scans
Each sensor scan may contain up to 5 data points
The estimated storage capacity of the DataSnap's memory is dependent on the the sensor count and reading interval.

Note:  When the memory is full, the DataSnap will replace the oldest data with the most recently collected data.  This means the DataSnap will not stop logging when its memory is full, but old data will be permanently lost if not collected within the required time frame (see Estimated Storage Capacity).